![]() Nat (outside,inside_1) static interface service tcp 9966 9966Īccess-group outside_access_in in interface outsideĪccess-group inside_1_access_in in interface inside_1Īccess-group inside_access_in_2 in interface inside Nat (any,outside) static interface service tcp domain domain ![]() Nat (any,outside) static interface service tcp 5068 5068 ![]() Nat (any,inside_1) static interface service udp 5068 5068 Icmp unreachable rate-limit 1 burst-size 1 Same-security-traffic permit inter-interfaceĪccess-list 100 extended permit icmp any anyĪccess-list from_outside extended permit icmp any any echoĪccess-list inside_1_access_in extended permit ip any anyĪccess-list outside_access_in extended permit ip any anyĪccess-list outside_access_in extended permit object-group TCPUDP any object test object-group TestĪccess-list outside_access_in extended permit object-group TCPUDP any object smartrobotsip object-group smartrobotĪccess-list outside_access_in extended permit object-group TCPUDP any object dns object-group DnsĪccess-list outside_access_in extended permit tcp any object PBX_insides eq 9966Īccess-list inside_access_in_2 extended permit ip any any Output of "show running-config" ddns update method myupdate There is also another outside interface using the PPPoX. There is no error occur during the configuration.ġ92.168.1.168 is the ip address of the PBX So when i configure by referring other video and articles and only change the ip address, real port and mapped port, is still unable to access to the PBX interface when enter the public ip address. ![]() What my goal is when enter the public ip address with the specific port number, it will able to show the interface of the PBX.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |